this is information on a product in full production. november 2012 doc id 023284 rev 1 1/9 9 EMIF03-SIM05F3 emi filter with swp protection for sim interface datasheet ? production data features lead-free package very low pcb space consumption very thin package: < 0.55 mm after reflow high efficiency in esd suppression iec6 1000-4-2 level 4 high reliability offered by monolithic integration high reduction of parasitic elements through integration and wlcsp packaging complies with the following standards: iec 61000-4-2 level 4 ? 15 kv (air discharge) ? 8 kv (contact discharge) application mobile phones description the EMIF03-SIM05F3 is a highly integrated device designed to protect sim interface and swp line against esd transients and emi emission. the device is the ideal fit for applications using nfc. figure 1. pin configuration (bump side) figure 2. functional schematic wlcsp package (9 bumps) swp www.st.com
characteristics EMIF03-SIM05F3 2/9 doc id 023284 rev 1 1 characteristics figure 3. electrical characteristics (definitions) table 1. absolute maximum ratings (t amb = 25 c) symbol parameter value unit v pp internal pins (a3, b3, c3): esd discharge iec 61000-4-2 (1) , level 1 air discharge contact discharge external pins (a1, a2, b1, c1, c2): esd discharge iec 61000-4-2, level 4 air discharge contact discharge 1. measurements done on iec 61000-4-2 test bench. for further details see application note an3353, ?iec 61000-4-2 standard testing?. 2 2 16 16 kv t j maximum junction temperature 150 c t op operating temperature range - 30 to + 85 t stg storage temperature range - 55 to 150 table 2. electrical characteristics (t amb = 25 c) symbol test conditions min. typ. max. unit i rm v rm = 3 v 100 na v br i r = 1 ma 6 v r1 , r3 rst, data serial resistor 100 ? r2 clk serial resistor 47 c line line capacitance on rst, data, clk lines v line = 0 v, v osc = 30 mv, f = 1 mhz (measured under zero light conditions) 12 pf c swp line capacitance on swp line v line = 0 v, v osc = 30 mv, f = 1 mhz (measured under zero light conditions) 23pf symbol parameter v = breakdown voltage i = leakage current @ v v = stand-off voltage v = clamping voltage i = peak pulse current br rm rm rm cl pp v i v cl v br v rm i rm i pp
EMIF03-SIM05F3 characteristics doc id 023284 rev 1 3/9 figure 4. attenuation measurements c1-c3, a2-a3, b1-b3 figure 5. attenuation measurements a1-c2 s21(db) 100.0k 1.0m 10.0m 100.0m 1.0g -30.00 -25.00 -20.00 -15.00 -10.00 -5.00 0.00 data clk rst f(hz) s21(db) 100.0k 1.0m 10.0m 100.0m 1.0g -30.00 -25.00 -20.00 -15.00 -10.00 -5.00 0.00 swp vcc f(hz) figure 6. analog xtalk measurements figure 7. digital crosstalk measurements xtalk (db) 100.0k 1.0m 10.0m 100.0m 1.0g -110.00 -100.00 -90.00 -80.00 -70.00 -60.00 -50.00 -40.00 -30.00 -20.00 -10.00 0.00 clk -swp clk -rst rst -data f(hz) v clk = 3 v t r = t f = 2 ns clk data figure 8. dynamic characteristic (swp) figure 9. dynamic characteristic (v cc ) 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 0 5 10 15 20 25 30 35 40 breakdown direct poly. (breakdown) poly. (direct) i pp (a) v cl (v) t p = 100 ns t j initial = 25 c 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 0 5 10 15 20 25 30 i pp (a) breakdown direct poly. (breakdown) poly. (direct) v cl (v) t p = 100 ns t j initial = 25 c
characteristics EMIF03-SIM05F3 4/9 doc id 023284 rev 1 figure 10. esd response to iec 61000-4-2 (+8 kv contact discharge) clk line figure 11. esd response to iec 61000-4-2 (-8 kv contact discharge) clk line v : peak clamping voltage v :clamping voltage @ 30 ns v :clamping voltage @ 60 ns cl cl v :clamping voltage @ 100 ns cl cl 1 2 3 4 20.0 v 7.3 v 6.8 v 3.4 v 1 2 4 3 5.0 v / div 20 ns / div -9.3 v -342 m v -1.4 v -249 m v 1 2 4 3 20 ns / div 5.0 v / div v : peak clamping voltage v :clamping voltage @ 30 ns v :clamping voltage @ 60 ns cl cl cl cl v :clamping voltage @ 100 ns 1 2 3 4 figure 12. esd response to iec 61000-4-2 (+8 kv contact discharge) data line figure 13. esd response to iec 61000-4-2 (-8 kv contact discharge) data line 18.8 v 6.6 v 6.2 v 2.9 v 1 2 4 3 5.0 v / div 20 ns / div v : peak clamping voltage v :clamping voltage @ 30 ns v :clamping voltage @ 60 ns cl cl cl cl v :clamping voltage @ 100 ns 1 2 3 4 -9.7 v -454 m v -1.7 v -193 m v 1 2 4 3 5.0 v / div v : peak clamping voltage v :clamping voltage @ 30 ns v :clamping voltage @ 60 ns cl cl cl cl v :clamping voltage @ 100 ns 1 2 3 4
EMIF03-SIM05F3 characteristics doc id 023284 rev 1 5/9 figure 14. esd response to iec 61000-4-2 (+8 kv contact discharge) swp line figure 15. esd response to iec 61000-4-2 (-8 kv contact discharge) swp line 107.6 v 22.5 v 13.5 v 5.6 v 1 2 4 3 20 v / div 20 ns / div v : peak clamping voltage v :clamping voltage @ 30 ns v :clamping voltage @ 60 ns cl cl cl cl v :clamping voltage @ 100 ns 1 2 3 4 -54.0 v -5.0 v -4.9 v -1.7 v 1 2 4 3 10 v / div 20 ns / div v : peak clamping voltage v :clamping voltage @ 30 ns v :clamping voltage @ 60 ns cl cl cl cl v :clamping voltage @ 100 ns 1 2 3 4 figure 16. esd response to iec 61000-4-2 (+8 kv contact discharge) v cc line figure 17. esd response to iec 61000-4-2 (-8 kv contact discharge) v cc line 46.1 v 13.2 v 10 v 5.0 v 1 2 4 3 20 v / div 20 ns / div v : peak clamping voltage v :clamping voltage @ 30 ns v :clamping voltage @ 60 ns cl cl cl cl v :clamping voltage @ 100 ns 1 2 3 4 -20.0 v -2.4 v -3.1 v -1.2 v 1 2 4 3 5 v / div 20 ns / div v : peak clamping voltage v :clamping voltage @ 30 ns v :clamping voltage @ 60 ns cl cl cl cl v :clamping voltage @ 100 ns 1 2 3 4
ordering information scheme EMIF03-SIM05F3 6/9 doc id 023284 rev 1 2 ordering information scheme figure 18. ordering information scheme emif yy - xxx zz fx emi filter number of lines information x = resistance value (ohms) z = capacitance value / 10 (pf) or 3 letters = application 2 digits = version package f = flip chip x = 3: lead-free, pitch = 400 m, bump = 255 m
EMIF03-SIM05F3 package information doc id 023284 rev 1 7/9 3 package information in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. figure 19. wlcsp package dimensions figure 20. footprint recommendations figure 21. marking 3 2 1 a b c 1.22 mm 0.05 m 400 m 1.22 mm 0.05 m 255 40 m ? x y x w z w dot, st logo xx = marking z = manufacturing location yww = datecode (y = year ww = week) ecopack ? grade
ordering information EMIF03-SIM05F3 8/9 doc id 023284 rev 1 figure 22. tape and reel specification note: more information is availa ble in the application notes: an2348, ?ipad? 400 m flip chip: package description and recommendations for use? an1751, ?emi filters: recommendations and measurements? 4 ordering information table 3. ordering information 5 revision history table 4. document revision history 8.0 +0.3 -0.10 4.0 0.1 1.75 0.1 3.5 - 0.05 1.30 0.05 dot identifying pin a1 location user direction of unreeling all dimensions are typical values in mm 4.0 0.1 2.0 0.05 ? 1.50 0.10 0.69 0.05 0.20 0.02 1.30 0.05 order code marking package weight base qty delivery mode EMIF03-SIM05F3 lb wlcsp 1.9 mg 5000 tape and reel (7?) date revision changes 12-nov-2012 1 initial release.
EMIF03-SIM05F3 doc id 023284 rev 1 9/9 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2012 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
